Share:
Top Features
· Effortless arc control for the smoothest welds
· AC Auto-Balance® makes it simple by automatically providing the optimal mix of cleaning and penetration on aluminum
· Intellistart™ Technology provides soft starts on thin materials and hotter starts required on thicker materials
· Customization when you need it. - Manage AC frequency, balance and offset to modify arc profile, cleaning action or penetration
Input Power
· 200-600/1/3/50/60
Processes
TIG, Stick
·
· Effortless arc control for the smoothest welds
· AC Auto-Balance® makes it simple by automatically providing the optimal mix of cleaning and penetration on aluminum
· Intellistart™ Technology provides soft starts on thin materials and hotter starts required on thicker materials
· Customization when you need it. - Manage AC frequency, balance and offset to modify arc profile, cleaning action or penetration
Input Power
· 200-600/1/3/50/60
Processes
TIG, Stick
| INPUT POWER | · 200-600/1/3/50/60 |
| RATED OUTPUT |
· 3 Phase: · 330A/40% · 300A/60% · 1 Phase: · 240A/40% · 225A/60% |
| INPUT CURRENT |
· 3 Phase: · 60% Duty Cycle: 29/26/15/12/10 · 40% Duty Cycle 27/24/14/11/9 · 1 Phase: · 60% Duty Cycle: 34/31/NA/NA/NA · 40% Duty Cycle: 32/29/NA/NA/NA |
| OUTPUT RANGE |
· 3 Phase: 2-375A · 1 Phase: 2-250A |
| DIMENSIONS (H X W X D) | 21 in x 11.8 in x 25.5 in (533 mm x 300 mm x 648 mm) |
| NET WEIGHT | 110.00 (49.90 kg) |
| AC WAVE SHAPE CONTROLS | |
| AC FREQUENCY | 40-400 Hz |
|
A lower frequency results in a wider bead. A higher frequency results in a more focused bead. |
|
| AC BALANCE CONTROL | 35-99% (EN%) |
|
A lower AC Balance (EN%) results in an arc with increased cleaning action. A higher AC Balance (EN%) results in an arc with higher penetration. |
|
| ELECTRODE POSITIVE (EP) AND NEGATIVE OFFSET (EN) |
2-375 Amps EP 2-375 Amps EN |
|
A higher Electrode Positive (EP) current value results in intensified cleaning action. A higher Electrode Negative (EN) current value results in intensified penetration. |
|
|
PULSE FUNCTIONS |
|
| AC PULSE FREQUENCY |
0.1-25% of AC output frequency setting in pulses per second |
| DC PULSE FREQUENCY | 0.1-2,000 pulses per second |
|
Alternating the current between peak and background helps better manage heat input and minimize material distortion. Provides for better arc control and faster freezing for uphill welding. Helps moderate filler metal deposition at low pulse frequencies (less than 10 pulses per second). |
|
|
AC WAVE FORMS |
|
| SOFT SQUARE | Increased puddle control |
| SINE | A soft sounding arc |
| SQUARE | Faster travel speeds |
| TRIANGULAR | Reduced heat input on thinner materials. Also provides for better cleaning on anodized applications |
Introduction to Aspect 375
Inquiry - Aspect 375 TIG Welding Machine
